Sewer Rodding
Similar to sewer jetting, sewer rodding requires the right tool for the blockage in the line. Here you can find just that. Make this next job an easier one!
Showing 81–96 of 124 results
-
SPD-3 3 HP Power Drive Units Include Speed-Chuck, Specify 5/16” or 3/8” SPD-6.5 6.5 HP Power Drive Units Include Speed-Chuck, Specify 5/16” or 3/8” SPD-8 8 HP Power Drive Units Include Speed-Chuck, Specify 5/16” or 3/8”
-
STR-1-1 5/16” X 36” PREMIUM SEWER ROD COMPLETE WITH COUPLING STR-1-2 5/16” X 39” PREMIUM SEWER ROD COMPLETE WITH COUPLING STR-1-3 5/16” X 48” PREMIUM SEWER ROD COMPLETE WITH COUPLING STR-1-4 5/16” X 60” PREMIUM SEWER ROD COMPLETE WITH COUPLING STR-1-5 5/16” X 72” PREMIUM SEWER ROD COMPLETE WITH […]Read More
-
This tool is used to pull, push or turn the sectional rods. The locking pin goes through the center hole of the coupling so you can apply torque to the rods.T4-1 5/16” PULL OUT & TWISTING HANDLE T4-2 3/8” PULL OUT & TWISTING HANDLE
-
A pull out tool available in two sizes (5/16″ and 3/8″)Item IDs T3-1 5/16″ T3-2 3/8″
-
This tool is specially made with a hex center to not only grab the hex coupling of the No. 5 so you can really torque turn them the rods, but also slides over the coupling to allow you to push and pull the rods into the lateral sewer line.Product Number : P5-10
-
This is a lightweight rod carrying frame for the no. 5 rods. Normally sold in the set but here you can buy just the frame too. It can carry up to 30 rods. All steel. Allows you to keep a long distance of rods coupled up and ready to pay off to clean your lateral […]Read More
-
Ratchet Turning Handles, One or Two man operation. These accessories are used for hand rodding. Using the single T11 two operators are needed and using alternating strokes. One man tool T13 lets just one man do the job.
-
These Root Cutters are for 3” or 4″ pipes for the “B” Plumbers Lateral rods. The Root cutter is 6’ long also and made of ¼” spring steel. It connects right up to your “B” rods with round couplings and is an aggressive cutting tool with flat spiral steel blades with cutting edges on the […]Read More
-
The flat spiral steel blade features sharp cutting edges on both the front and the back edges to cut and slice in both direction. The sharp front angles point will bore through obstructions and stoppages and the tapered cone-like shape for the tool holds roots, paper and rags tightly while pulling them back to the […]Read More