Sewer Rodding
Similar to sewer jetting, sewer rodding requires the right tool for the blockage in the line. Here you can find just that. Make this next job an easier one!
Showing 97–112 of 124 results
-
These are the Coiled spring Wire Corkscrews for 2” or 4” pipe for the No. 5 Plumbers Lateral rods. Each of these corkscrews are 12” long also and made of ¼” spring steel. They have a very flexible coiled design that gives them great flexibility around bends and sweeps. They connect right up to your […]Read More -
3? Round Wire Corkscrew. Made from the same material as the 5/16? or 3/8? rods. Comes in sizes from 1.5? to 6?. Great for use in lines with little or no flow. -
G-3-1 3” SAND CORKSCREW USE WITH 5/16” ROD G-3-2 3” SAND CORKSCREW USE WITH 3/8” ROD -
The sand leader is designed to ride above the sand at the bottom of the manhole. It’s curved wings allow it to rotate without digging in. The front hole also serves as a cable pull hole (bucket machines) as they are designed to remove the sand mechanically. -
Sand traps have been used for years to trap the sand in the manhole before it goes downstream. Insert one end in horizontal position into the downstream line, the water will rise up over the vertical end and continue downstream but the sand will accumulate around the trap for removal. -
AC-1-1 0.375 Set screw type, to 3/8”COARSE RH THREAD AC-1-2 0.393 Set screw type, to 3/8” COARSE RH THREAD AC-1-3 0.415 Set screw type, to 3/8” COARSE RH THREAD AC-1-4 0.461 Set screw type, to 3/8” COARSE RH THREAD -
AC-3-1 0.375 Set screw type, to 5/16” COARSE RH THREAD AC-3-2 0.393 Set screw type, to 5/16” COARSE RH THREAD AC-3-3 0.415 Set screw type, to 5/16” COARSE RH THREAD AC-3-4 0.461 Set screw type, to 5/16” COARSE RH THREAD -
STB-1-1 5/16” X 36” SEWER ROD COMPLETE WITH COUPLING STB-1-2 5/16” X 39” SEWER ROD COMPLETE WITH COUPLING STB-1-3 5/16” X 48” SEWER ROD COMPLETE WITH COUPLING STB-1-4 5/16” X 60” SEWER ROD COMPLETE WITH COUPLING STB-1-5 5/16” X 72” SEWER ROD COMPLETE WITH COUPLING […]Read More -
Lightweight Rod Guide Hose Brace. The chain on the end goes around the Aluminum Bell end on the guide hose and is tightened with a clevis. The brace is adjustable and comes with a 25’ long rope for lowering guide hose into manhole. -
This is a PB-6 Pick-up tool that connects to your ¼” PB-1 Lateral cleaning rods. This comes standard in the “B” set but can be purchased separately too. This is a great tool for punching through hard deposits to regain flow. The spear head is made of Hard 4130 steel and heat treated to 55 […]Read More -
The hardened steel sharp cutting edges on the spear point are great boring through obstructions and stoppages of grease or rust. This 2” spear point is connected to a tight wound coiled rod that is great for going around bends are sweeps. Connects to your no. 5 lateral plumbing rods.Product Number : P5-6 -
FRS-3B 3” STANDARD FLAT ROOT SAW BLADE ONLY FRS-4B 4” STANDARD FLAT ROOT SAW BLADE ONLY FRS-6B 6” STANDARD FLAT ROOT SAW BLADE ONLY FRS-8B 8” STANDARD FLAT ROOT SAW BLADE ONLY FRS-10B 10” STANDARD FLAT ROOT SAW BLADE ONLY FRS-12B 12” STANDARD FLAT ROOT SAW BLADE ONLY FRS-15B 15” STANDARD FLAT ROOT SAW BLADE […]Read More
